Benz Fbs3 Keyless Go Key User Manualauto Diagnostic Tool

by



In this article,i will show you step-by-step guide on how to use Zed-Full programmer to perform all key lost programming for Benz W210.

Benz W210 All Key Lost Programming:

The key is not reusable. The key is connected by USB for data read and write. As long as you can read the Ignition Switch’s data and collect the correct password, the key can match the same function as the OEM keyless go.

Power on Zed-Full,enter menu to select [MB IR-PROG]

Select [Program]

Select [Lost Key]

Note:If there is no working key available use this option (all key lost)

  • 1.Mercedes Benz BGA smart key / only support FBS3. 2.After matching with this key, there is the same keyless entry function as the original key. 3.When you open the door, no need to press the remote control, press the button of the door handle to unlock. 4.When the door is closed, the key can be closed without pressing the key, just pres door.
  • Let’s starts with some frequently asked questions on the Benz FBS3 BGA keyless Go Key. I buy this keyless go key, How to write via usb? And i can reuse it? And this connection with which tool use Continue Reading →.
  • Mercedes Benz BGA smart key / only support FBS3. 2.After matching with this key, there is the same keyless entry function as the original key. 3.When you open the door, no need to press the remote control, press the button of the door handle to unlock. 4.When the door is closed, the key can be closed without pressing the key, just pres door.

Select [SERVER (FBS 3 System)]

Note:ZFH-MCA,Zed-NET,IR-PROG,ZFH-C09 parts are required for this application

Connect ZFH-C16 cable to ZFH-MCA adapter

Connect Zed-NET to ZFH-MCA adapter

Connect ZFH-C15 to ZFH-MCA adapter and connect ZFH-UTE to ZFH-C15 cable

Connect ZFH-C10 to ZFH-MCA adapter and connect IR-PROG to ZFH-C10 cable

Connect ZFH-C16 cable to EXERNAL PORT on Zed-Full back port

Press Continue button

Press on [Select System (C09)] and select “CLASS E W210” EZS/EIS type on list

Connect ZFH-09 cable to [OBD2 DONGLE] port on Zed-Full back port

Connect ZFH-C09 cable pins to related pins on EZS/EIS socket as shown on Zed-Full screen

Make sure ZFH-C09 pins are connected to EZS/EIS pins properly and press on Continue

Data is being read from EZS/EIS unit.

Press continue button on Zed-Full screen

All required ZFH-MCA connections have already been done.Now insert ZFH-UTE to EZS/EIS (ignition) and press Continue button

Successful

Zed-NET has already connected to this Wi-Fi network

For password calculation ZFH-UTE must be connected to EZS/EIS unit.

To start process press on Continue button

Each password calculation will take about 30 minutes.

30 minutes later

The password calculation will take up to 2 minutes

Benz Fbs3 Keyless Go Key User Manualauto Diagnostic Tool

If password calculation fails,Zed-Full will continue the process automatically till calculating password.After password calculation,key list will be viewed on Zed-Full screen.

Either Empty or Used marked slots can be selected to program a new key.(“Used” marked slots shows the existing programmed keys on this car memory)

In this case programming a new key on a “Used” marked slot,new programmed key will start the car but same slot old key will not.

Here select “3-Used”,and press Continue button

Key data is generated

Select “EA Key (IR)”

Put “EA” version key to “IR-Prog” and press “Program” button

“EA” version key is being programmed to to the car.

Wait for proceed

Benz Fbs3 Keyless Go Key User Manual Auto Diagnostic Tool Kit

Readers who read this article also read:

MB FBS3 BGA KeylessGo Key assembly process is available in this article, it shares the same procedure as that of Xhorse VVDI Benz smart key shell 3 button.

MB FBS3 BGA KeylessGo Key is taken apart, and all parts are here:

Next is on how to put these parts together:

  1. Removethe cover and install the battery.
  1. Put into the CG MB FBS3 BGA KeylessGo Keypcb.
  1. Close the back cover.
  1. Buckle the metal edge.
  1. Match the key and test ifthe key works. Press the remote control button to see if the light is on.
  1. Install the small key clip and spring.

Benz Fbs3 Keyless Go Key User Manual Auto Diagnostic Tool Repair

  1. Fit the tail.

Benz Fbs3 Keyless Go Key User Manual Auto Diagnostic Tools

  1. Buckle the plastic card.
  1. Install the small key.
  1. Assembly the key successfully.

Benz Fbs3 Keyless Go Key User Manualauto Diagnostic Tool

Source:How to assemble MB FBS3 BGA KeylessGo Key?

Benz Fbs3 Keyless Go Key User Manual Auto Diagnostic Toolkit

Related posts: