Driver Usbeeaulasopa



Fresco logic FL2000 – VGA

USB 3.0 a VGA steren driver win 10

Recently we found some crashes on Win10 anniversary update OS with certain inbox display driver, and found out that the WDDM architecture was updated from 2.0 to 2.1.
Starting from version 2.0.34054.0, the complete support of WDDM2.1 is added. Make sure you download the latest driver.

If your device connects a computer to a monitor or TV then you want our USB 3.0 to VGA/HDMI Driver.
If your device adds USB ports to your computer then you want our USB 3.0 Host Controller Driver.

Downloads

  1. Auto Driver free download - Driver Booster, Auto Clicker by Shocker, Grand Theft Auto, and many more programs.
  2. Usb driver download - Best answers Download usb driver - Best answers Spvd-012.1 usb driver for windows 10 - Forum - Drivers.
  3. For composite devices, use USB Generic Parent Driver (Usbccgp.sys) that creates physical device objects (PDOs) for each function. For non-composite devices or a function of a composite device, use WinUSB (Winusb.sys). If you are installing USB drivers: You do not need to download USB device class drivers. They are installed automatically.

Driver for Windows 10

Download the latest version of the USB (Universal Serial Bus) Controller driver for your computer's operating system. All downloads available on this website have been scanned by the latest anti-virus software and are guaranteed to be virus and malware-free. Download USB (Universal Serial Bus) Controller Driver Update Utility. Then you can download the USBee Suite that will run on top of those drivers. USBee Suite Pro and Standard Software (32-bit And 64-Bit) USBee Suite version 1.1.78 Updated 5/2/2014 Release Notes. Contains the USBee Suite software that runs in Demo mode or on the BusBee, USBee SX, DX, AX and ZX Test Pods. USBee Suite User's Manual (pdf).

USB 3.0 to VGA/HDMI Driver
FL2000-2.1.34054.0 (Windows)
USB 3.0 to VGA/HDMI FL2000 Driver FL2000-2.1.34054.0

USB 3.0 to VGA/HDMI Driver
(FL2000) ver 2.1.34
USB 3.0 to VGA/HDMI FL2000 Driver FL2000-2.1.34054.0

USB 3.0 to VGA/HDMI Driver
(FL2000) ver 2.1.33
USB 3.0 to VGA/HDMI FL2000 Driver FL2000-2.1.33788.0

Driver for Mac/OSX

Starting from version 2.1.33350.0, Indirect Display Driver is supported, which aims to eliminate lots of compatibility issues. Make sure you upgrade your driver to the latest if you are running win10 RS1 OS or above.

Installer Error Message “thin2000 usb display adaptor setup ended prematurely”

This error often occurs when you are installing new driver (eg. V2.0 or above) while you have old driver installed (V1.0), and the old driver wouldn’t get uninstalled.

Here is step-by-step procedure to uninstall your previous driver.

1. Locate your original driver CD where you would find “FLUSBVGA-1.1.329.EXE” (for example).

2. Copy the FLUSBVGA-1.1.329.EXE to C: .

3. Invoke cmd.exe with “administrator privilege”. type “cd ”, “dir FLUSBVGA*.EXE”. You should see the file in the cmd window output.

4. type “FLUSBVGA-1.1.329.EXE /extract”. You should see 2 msi files extracted. type “dir *.msi”. The 32bit MSI file should look like this xxxxx.msi , while the 64bit msi should be xxxxx.x64.msi. The xxxxx denote random numbers.

5. If your OS is 64bit , type “msiexec.exe /x xxxxx.x64.msi”. Otherwise type “msiexec.exe /x xxxxx.msi”. At this step ,you should see uninstaller window shows up.

6 During step 5, you will be required to reboot your system. After that, you can install the latest driver.

If the above still fails, send us the step by step cmd.exe window screen dump (by ALT-PrintScreen Key, and save it to a bmp file).

USB 3.0 Controller not working or disappears when devices are connected.

This is usually caused by lack of power to the card. Many of the cards using our USB 3.0 host controllers have a power connector that needs to be connected to the system power supply.

If a power cable is not connected then the controller may show up in Windows Device manager but disappear when any USB devices are connected

to the controller.

Other possible symptoms:

Controller doesn’t appear in Device Manager.

Controller appears with a yellow triangle in Device Manager.
Controller appears in Device Manager but disappears when an

y device is plugged in.

Driver usbeeaulasopa xerox

Linux driver:

Fresco Logic FL2000 Linux/Android kernel driver
Open source https://github.com/FrescoLogic/FL2000

This is an official driver release from Fresco Logic in an attempt to help the open-source community adopting the development and use of the FL2000DX device. This driver only covers the USB part of the display logic. It does not support the Linux desktop logic (eg. extended desktop vs mirrored desktop).

1. On which kernel versions does this driver work?

This driver is tested on Ubuntu 14 LTS as well as some Android platforms with kernel version 3.10.x. This driver source might not compile on newer kernels (eg. 4.0 or above) because of the fast-moving API changes in the mainstream kernel. You might need to adapt it for your own use.

2. Target audience

This release is targeted to open-source developers, as opposed to end-users.

3. How do I enable extended desktop/mirrored desktop on my X Window?

Currently Fresco Logic does not provide desktop related manipulation. Fresco Logic hopes the community will contribute to this area so that end-users can easily adopt this solution.

4. FL2000DX limitation.

The FL2000DX chip is cheap by design where it doesn’t have a frame buffer on its own. It relies heavily on USB 3.0 transfer speed to accommodate continuous USB flow. The larger the image is, the heavier it depends on USB bandwidth. A typical 1920×[email protected] Hz requires 1920 * 1080 * 24bpp * 60 = 373,248,000 bytes/sec of traffic over the USB bus. As such, USB2.0 speed is not supported.

Connecting more than one FL2000DX device to the same bus is deprecated.

How do I file a bug to the Fresco Logic developers?
You can file bugs to Github Issues

DOS USB Drivers

There are several ways folks are getting their USB CDroms, Hard Drives, and other drives to work in DOS. One is using what's known as DUSE driver system. The second method is using what looks somewhat like standard CDrom driver files and a USB driver. Both methods appear to require loading an usbaspiX.sys file first in config.sys in most cases. The third method is a bootdisk from a USB vendor. Method 4 is getting good reviews also.

Driver Usbeeaulasopa Driver

METHOD 1 - The DUSE System

Example 1 Using DUSE

[config.sys]
device=a:himem.sys
devicehigh=a:emm386.exe
device=a:usbaspi.sys
dos=high,umb

Note: You can find a usbspi.sys on the internet or use on of the five different versions I've found in the Download Files section at the bottom of the page

[autoexec.bat]
@echo off
duseldr a:duse.exe
MSCDEX /D:USBCDROM /S /M:15 /V

Example 2 Using DUSE

[config.sys]
device=a:himem.sys
DEVICE=a:duse.exe

[autoexec.bat]
MSCDEX /D:USBCDROM /S /M:15 /V


METHOD 2 - The usbaspi.sys/usbcd.sys System - Example 1

As noted, this method seems just like loading IDE drivers, with the added entry of the usbaspiX file. The following are the relevant portions taken from a modified config.sys and autoexec.bat file which was designed to work with a Windows 98 OEM Bootdisk with the ramdrive.

The complete config.sys and autoexec.bat replacement files are available for download below, and you might want to start first with just copying them to your OEM bootdisk along with the relevant drivers and then experiment later with getting them to work on your Customized disk.

[config.sys - example 1]
device=himem.sys /testmem:off
device=usbaspiX.sys
device=usbcdX.sys /D:mscd001

[config.sys example 2 - USB Floppy in only port, 'sometimes' allows switching to CDrom after boot]
device=himem.sys /testmem:off
device=ramfd.sys
device=usbaspiX.sys /W
device=usbcdX.sys /D:mscd001

[autoexec.bat]
LH %ramd%:MSCDEX.EXE /D:mscd001 /L:%CDROM%


METHOD 2 - The usbaspi.sys/usbcd.sys System - Example 2

'I finally got my Belkin external drive enclosure with a WD 120gb drive to work in DOS, and then perform a GHOST image', wrote don b. 'Here's the files and config.sys that worked.'

[config.sys]
device=himem.sys /testmem:off
devicehigh=usbaspi1.sys
devicehigh=di1000dd.sys
devicehigh=usbcd2.sys /d:USBCD001
LASTDRIVE = Z

[autoexec.bat]
don b. noted that either the standard Ghost or Win98X autoexec.bat worked as is.


METHOD 2 - The usbaspi.sys/usbcd.sys System - Example 3

Herbert H. writes: 'I Just solved my problem by using the files from the 'virtual' DOS drive ghost03 makes when you run interactive mode. It uses IOmega USB drivers and Guest.exe. It alowed me to use my Western Digital external USB HD in DOS.

[config.sys]
LASTDRIVE=Z
DEVICE = usbaspi4.sys /int /all
DEVICE = usbaspi5.sys /int /all
DEVICE = usbaspi5.sys /int /all /D1
DEVICE = usbcdX.sys /D:cd2
DEVICE = OAKCDROM.SYS /D:cd1 [For his IDE CDrom]


METHOD 3 - The datoptic System

A USB 4 DOS bootdisk has been posted here called dat.exe

The key driver files in dat.exe include:

usbaspi.sys 37,090 bytes
nj32disk.sys 15,808
sbp2aspi.sys 28,836

datoptic.com recommends the following config.sys for it's USB/1394 products. It's been reported tho that their drivers also work for other brands as well.

[menu]
menuitem=USB,USB Boot
menuitem=1394,1394 Boot
menudefault=USB,30
menucolor=7,0

[USB]
DEVICE = USBASPI.SYS

[1394]
DEVICE = SBP2ASPI.SYS

[COMMON]
DEVICE = NJ32DISK.SYS /R
LASTDRIVE=Z


METHOD 4 - The Iomega Way

Ben B. wrote:

I built a boot disk to access a USB external hard drive from DOS using drivers included with Norton Ghost. 2003. Since Ghost can write to the external drive in DOS, I figured I could copy its drivers. Turns out they are from Iomega. I wanted to access the external drive to run a disk wiping program. Autoexec.bat and Config.sys can be much improved, but this is the bare bones of the boot disk. Note that the Iomega drivers will work with any USB external hard disk and are not proprietary to Iomega drives (mine is a Western Digital).

Config.sys:

DEVICE=aspiehci.sys /int /all
LASTDRIVE=Z

Autoexec.bat:

@echo off
GUEST.EXE

Contents of my boot disk:

aspiehci.sys [Iomega USB 2.0 driver]
Autoexec.bat
Command.com
Config.sys
guest.exe [Another Iomega program required to access the USB drive]
Io.sys
Msdos.sys

Thanks Ben. Your letter has enough information tho to put folks on the right track to find the drivers themselves. If folks want to save some time tho they can get the drivers here.

+++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++

DOWNLOAD FILES:

DUSE 4.4DUSE 4.9 With Excellent Docs

The USBdrivers collection includes 5 different usbaspi.sys and 2 usbcd.sys files, the iomega drivers, the ramfd.sys driver, and the modified Win98 OEM config.sys and autoexec.bat files. You will have to experiment to see which one works for you.

The key driver files I've put together for you in the [USBdriver] collection include:

ramfd.sys 22,012 bytes
usbaspi1.sys 39,093
usbaspi2.sys 43,528
usbaspi3.sys 37,090
usbaspi4.sys 49,242
usbaspi5.sys 50,606

usbcd1.sys 5,509
usbcd2.sys 35,456
di1000dd.sys 16,368

Iomega:
aspiehci.sys 52,106
aspiehcj.sys 49,772 [renamed - older version of aspiehci.sys]
aspiohci.sys 42,242
aspinhci.sys 50,606
guest.exe 8.5 32,396

Please keep in mind that DOS USB CDrom/HDD/zip/etc. drivers is a brand new and developing area so there is no one single method that is guaranteed to work on every PC. If you try a few methods and have no luck, keep at it and dont worry as I'm confident there is enough information here to get at least 99% of the USB drives to work in dos.

A related article from theinquirer.net

Note that the files referred to in the article are included in my usb driver file download.


+++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++

Note that the files posted here are pretty much the most complete collection of USB drivers around. Oddly enough, if you have a USB floppy drive connected to your PC some of these cdrom/hard/zip drive drivers will fail to load or the above bootdisk will fail to work.

In fact, I'd remove ANY USB device you dont need [eg cams, mice, printers, etc.] when using the above files to get DOS access to your Drives.

Note that after you get your business done in DOS with the USB drivers that they really should be remmed out when you've done what you needed to and now want Windows to use the drive correctly using Windows drivers.

Also note that windows really doesn't like being installed from a usb device so if you only have a usb cdrom drive and need to install windows its best to copy the install files to a folder on your hard drive first and do the install from there. For example, if you are using win9X then make a folder on your hard drive called win98 and copy the files from the win98 folder on the cd to c:win98 then run setup from there.

If using XP then make a folder on your hard drive called i386 and copy the files from the i386 folder on the cd to c:i386 and run winnt.exe from there.

Please keep in mind that this is a new/developing area and I'm doing the best that I can in providing you with the info as it comes in so you are going to have to do some tweaking in the meantime.

+++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++

TESTIMONIALS

From jorj:
I unpacked the zipped file usbdrive.zip on my desktop. Then I looked in it and noticed there are [5] usbaspi.sys and 2 usbcd.sys files. Randomly I took usbaspi1.sys and usbcd1.sys and placed them into win98 startup cd, together with the autoexec.bat and config.sys files, which repalced the original bat/sys files on the startup disk. Then I ran the startup disk and watched the screen. It worked right from the start.


From obiwan
I use your bootdisk site often and your resources have bailed me out on several occasions. I recently set up USB support on some ghost boot disks that we use here and was excited to say the least. It worked on both the Plextor USB CD-ROMS and a Pioneer CD-ROM I have in an ADS USB enclosure. Thanks for the great site and keep up the great work.


From B. K.
Thanks for your excellent website - I just figured out how to read a USB CD drive from DOS solely because of your excellent advice.


From Daniel, Ottawa
I just purchaced a USB 2.0 Drive Kit at COSCO. I placed an IDE hard drive in it with all the images of PCs that I GHOST on a regular basis. Thanks to all the info provided on your website, I can now boot in DOS with USB support. I then run my GHOST floppy, and choose the correct image from the 'USB Hard Drive'. I no longer need multiple CDs... I no longer have to change CDs every 5 minutes for a full hour... I no longer have to burn tons of CDs... Thank you for your great website!


From Angelos
USB to Dos drivers, finally work. After many hours and attempts, I have managed to mount my SuperTalent External HD using the DUSE 4.9 driver found on this excellent site. The Ghost 2003 and DUSE 4.9 fit on a floppy so now I can image my HD my friends HD and so on. Thank you bootdisk you are the greatest.

Driver Usbeeaulasopa Lenovo


From Carmen (Spain)
I just want to say thanks to ben b. for sharing his experience. I was able to find the files I needed on the Internet and got my usb hard drive to work which did not come with dos drivers.


From A Gorman (UK)
This site is excellent. Downloaded dos usb drivers and it works great.


From Wim (Holland)
Thanks to [this page] I got my Xterasys - USB 2.0 casing with a WD 80 gig HD, to boot from a DOS bootable floppy disk. Instead of loading the DEVICE=aspiehci.sys /int /all from config.sys [ie the Iomega driver Ben B. used], I loaded DEVICE=ASPIOHCI.SYS /int /all, also a Iomega driver. It works GREAT!!!!


Driver Usbeeaulasopa Lbp